GAGEMAKER PN-3002 JFE Betriebshandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Industrielle Ausrüstung GAGEMAKER PN-3002 JFE herunter. GAGEMAKER PN-3002 JFE 20 Seiten. Pin nose gages and seal diameter gages pin nose gages and seal gage operation manual
Seite druckenPin Nose Gages and Seal Gage Operation Manual
INTRODUCTION
The Pin Nose gages measure critical pin seal diameters and widths. These gages adjust
to cover all sizes of seal diameters. The standard pin nose gage measures seal
diameters from 2 3/8" – 13 3/8".
The Pin Nose can be used to measure straight or tapered seal diameters, shallow bores,
and hole locations.
The pin nose gages use precision contact points to accurately measure the ring groove
diameter and width at the critical sealing point of the face groove.
Before inspecting parts, the pin nose gages must be preset to a nominal predetermined
dimension. The Seal Inspection Tolerances and Setting Dimension tables in this manual
determine the gage's setting dimensions and gauging tolerances. The pin nose gages can be
preset using gage blocks, Frame Standards, or Gagemaker's Pin Nose Diameter Gage
Setting Master.
To inspect parts, the contact points are placed in the seal of the part and the gage is
positioned by sweeping to obtain an indicator reading. Gage indicators show actual deviation
from the preset master dimension. Taking measurements in several different locations along
the seal will provide an average seal diameter or width. It is also recommended that the gage
be zeroed periodically during use to maintain accurate readings.
Technical Support
Phone: 713-472-7360
Hours: Monday – Friday 8AM – 5PM (CST)
Product Information and Updates
Visit our web site at: www.gagemaker.com
5