Active Silicon HARRIER H.264 Schnellstart-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Sicherheitskamera Active Silicon HARRIER H.264 herunter. Active Silicon HARRIER H.264 6 Seiten. Ip camera interface board

Active Silicon HARRIER H.264 Schnellstart-Handbuch
Viewing Video Streams
To view streaming video from the Harrier IP Camera Interface Board you will need a media player such as
VLC player or GStreamer.
Using VLC
Install and open
From the Media menu, select Open Network Stream
In the Open Media dialog, enter rtsp://<IP address>:8554/quality_h264
Click the Play button
Using GStreamer
Install GStreamer and open a command prompt or shell.
Run the following command:
gst-launch-1.0 rtspsrc location=rtsp://<IP Addres>:8554/quality_h264
decodebin ! autovideoconvert ! autovideosink sync=false
Note: to make GStreamer work on Windows, you may need to update the 'PATH' environment variable and
set the GStreamer environment variable; for example:
set GSTREAMER_1_0_ROOT_X86_64=c:\gstreamer\1.0\x86_64\
set path=%path%;% GSTREAMER_1_0_ROOT_X86_64%\bin;

Controlling the Camera

The camera can be controlled using the website or ONVIF media services.
In your web browser, enter: http://<IP Address> to access the website.
From the menu on the left hand side, select the Camera Control page.
The first tab on the page (see figure 8.) allows you send VISCA commands/inquiries to the camera so that
you can control its features (zoom, etc.). A small number of features have been mapped to buttons for
convenience, but a text entry dialog can be used to send arbitrary VISCA commands/inquiries to the
camera.
November 2021
HARRIER H.264 IP CAMERA INTERFACE BOARD
VLC player
QUICK START GUIDE
Version 1.0 – November 2021
!
Page 4 of 6