DAX BSN-CL12243 Installationshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationshandbuch für Toiletten DAX BSN-CL12243 herunter. DAX BSN-CL12243 4 Seiten.

Thoroughly clean the floor area where the toilet will be

installed. Align the flange ring at the pit pipe and mark

the place where the bolts should be fixed, take it away,

drill the holes at the marks with a suitable bit and fix

the expansion pipe. Screw the ange ring and fix the

whole ange ring on the floor with the bolts.

Unplug the waste opening. Gently place the toilet

right side up in position with the toilet mounting bolts

going through the holes in the porcelain base. Press

down on the toilet until it is leveled, if necessary use

wedges to make it leveled.

Apply a mould-proof silicon between the foor

and the toilet base.

I N S TA L L AT ION G UID E

The toilet should be placed on the floor upside

down, on a soft piece of cloth to prevent

scratching. Place the wax ring in the circular

recess in the base of the bowl.

Connect the water inlet to the tank. Make sure

water pressure is suffcient to fll the tank.

Check the replenishing pipe and see if the

water overfow pipe is inserted. Warning: if the

overfow pipe is not inserted, the fushing may

be affected.

Slowly open the water inlet and check the

water tightness of each connection joint.

Install the toilet seat in accordance with the

instructions.

ww w. daxib.c

BSN - C L1 22 4 3