Hi-Force AHP275BTU Betriebsanleitung - Seite 12

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Water Pump Hi-Force AHP275BTU herunter. Hi-Force AHP275BTU 19 Seiten. Air driven hydraulic pumps

Seite drucken

3. Turn the Air supply on from the mains.

Air Inlet Port

4. Lift the air regulator control knob (13) (the control knob will click securely in position), then twist

and turn the knob clockwise until roughly 2 bar of air pressure is achieved on the air gauge (19)

[3].

5. Twist and turn the air lubricator control knob (16) until roughly 1 droplet per minute is achieved [4].

NOTE: Allowing more oil than this into the motor can lead to contamination of the exhaust flow.

6. Open the Air stop/control valve (5) [2b].

7. Close the High pressure/Pressure release valve (6) clockwise.

NOTE: close valve to finger tight only.

Operating Instruction Manual:

Air Valve closed

OM-AHP-BTU-01

Air Valve open

Serial Numbers:

FROM BQ 9522