Great Lakes CMR Installationsanleitung Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Racks & Ständer Great Lakes CMR herunter. Great Lakes CMR 6 Seiten. Cable management racks

Seite drucken

PREFACE

This manual is provided to prevent service personnel from committing an act that results in the risk

of fire, electric shock, or injury to persons. Only trained service personnel should receive, unpack,

and assemble the racks. In addition, only trained service personnel should install equipment in

enclosures.

SAFETY SYMBOLS USED IN THIS MANUAL

This manual provides general safety guidelines to be observed during installation, operation, and

maintenance of the racks.

WARNING:

Failure to follow directions in the warning could result in injury to persons or loss of life.

BEFORE ASSEMBLY, PLEASE SEE PAGE 9 FOR SAFETY CONSIDERATIONS.

INSTALLATION

RECEIVING, UNPACKING, AND REMOVING THE RACK

Inspect and report damage before receiving. Unpack the rack by carefully removing the corrugated

cartons and corners. Avoid damaging the rack when removing packaging.

SERVICE

The CMR/CMRX Racks should be repaired by personnel trained by Great Lakes, or returned to Great

Lakes for repair or replacement. Contact Great Lakes Technical Support at 814.734.7303 or at

greatcabinets.com

HARDWARE

Racks and accessories ship with hardware to accommodate multiple assembly configurations.

Depending on the configuration you are building, you may have additional hardware.

INSTALLATION QUESTIONS?

Call Technical Support at 1-866-879-4522 or email [email protected]