6K Products 25G36 Betriebs- und Teilehandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Betriebs- und Teilehandbuch für Industrielle Ausrüstung 6K Products 25G36 herunter. 6K Products 25G36 17 Seiten. Connect and cut hydraulic chain

Seite drucken

After assembling the components as shown in figure 1, position the saw bar square to the log, at the correct height

with clearance between the bar guard and the side of the largest log and weld down solidly (Fig. 4).

Fig. 4

Hydraulic Connections

The hydraulic requirements to operate the saw are 24 to 26 gallons per minute at 2000 psi from a directional control

valve that has port A and B blocked in the neutral position. These pictures are examples of valve spool that will

work.

The hydraulic valve can be manual or electric control. Figure 5 shows hose

connections for correct operation.

Fig. 5