6K Products DH0605 Betriebs- und Teilehandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Betriebs- und Teilehandbuch für Industrielle Ausrüstung 6K Products DH0605 herunter. 6K Products DH0605 17 Seiten. Connect and cut hydraulic chain
After assembling the components as shown in figure 1, position the saw bar square to the log, at the correct height
with clearance between the bar guard and the side of the largest log and weld down solidly (Fig. 4).
Fig. 4
Hydraulic Connections
The hydraulic requirements to operate the saw are 29 to 35 gallons per minute at 2000 psi from a directional control
valve that has port A and B blocked in the neutral position. These pictures are examples of valve spool that will
work.
The hydraulic valve can be manual or electric control. Figure 5 shows hose
connections for correct operation.
Fig. 5
5