Active SmartHome Repeater Installations- und Betriebshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Wiederholer Active SmartHome Repeater herunter. Active SmartHome Repeater 15 Seiten. Active smarthome system

Seite drucken
2 2 2 2 .2. Function
.2. Function Switch Block
Switch Block
.2. Function
.2. Function
Switch Block
Switch Block
The Function Switch Block determines which mode the Repeater is in.
Function
DIP Switch 1
Learn Device
DIP Switch 2
Walk Test
DIP Switch 3
Factory Reset
Active
DIP Switch 4
Gateway Learn function
DIP Switch 8
Tamper Function
DIP Switches 5, 6 and 7 are Off by default and are not used. The DIP Switch
settings are only valid when Repeater is powered.

2 2 2 2 .3. .3. .3. .3. Tips for Use

Tips for Use
Tips for Use
Tips for Use
It is strongly recommended that a distance between each Repeater and/or Active
SmartHome Gateway is kept in order to avoid interference and static. If a particular
device is within the acceptable range for the Active SmartHome Gateway to receive
a transmission signal, the module can be learned by the Active SmartHome Gateway
directly by by-passing the Repeater.
R e p e a t e r
ON
Learning mode (Device)
Walk Test Mode
Clear Mode
SmartHome
Learning mode (Panel)
Disable
I ns t a l l a t i on a nd O pe ra t i o n G ui d e
I ns t a l l a t i on a nd O pe ra t i o n G ui d e
I ns t a l l a t i on a nd O pe ra t i o n G ui d e
I ns t a l l a t i on a nd O pe ra t i o n G ui d e
OFF
Normal Mode
Normal Mode
Normal Mode
Normal Mode
Normal Mode (Enabled)
P a g e | 7