6KU FIXIE Schritt-für-Schritt-Bauanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Schritt-für-Schritt-Bauanleitung für Motorrad 6KU FIXIE herunter. 6KU FIXIE 17 Seiten.
- 1. Table of Contents
- 2. Tools
- 3. Let's Get Started
- 4. Installing the Handlebar
- 5. Installing the Front Wheel
- 6. Aligning the Stem
- 7. Installing the Seatpost
- 8. Optimizing the Brake Pads
- 9. Preparing Pedals for Installation
- 10. Installing the Pedals
- 11. Pumping the Tires
- 12. Let's Finish up that Handlebar
- 13. Optional Fixed Gear/Freewheel
- 14. Contact Information
ALIGNING THE STEM
a.
While standing over your bike, take
your 5mm Allen Key and loosen both
pinch bolts on the backside of the
stem.
b.
Next, align the stem to the center of
the front wheel, making sure the stem
and front wheel are both parallel when
viewed from atop.
c.
Finally, tighten the stem's pinch
bolts.
d.
Untie/cut the string holding the
crank to the rear wheel.
5