Gaggenau CX480 Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kochfeld Gaggenau CX480 herunter. Gaggenau CX480 20 Seiten. Full surface induction cooktop
Auch für Gaggenau CX480: Installationsanleitung Handbuch (20 seiten)
Seite drucken
Residual heat indicator
The cooktop has a residual heat indicator f for each
side of the cooktop, which indicates any cooking
positions that are still hot. Do not touch the cooking
positions or the side of the cooktop with this display.
Even if the cooktop is already off, f will stay lit for as
long as the cooking positions are still hot.
2SWLRQV0HQ
Setting the cooktop
This section informs you how to set the cooking
positions. The settings table shows power levels and
cooking times for various meals.
Switching the cooktop on and off
Use the main switch to switch the cooktop on and off.
To switch on: touch the # symbol. The indicator
above the main switch lights up. After a short
activation time, the cooktop is ready for operation.
To switch off: touch the # symbol. The indicator in
the display switches off. All cooking positions are
switched off. Hibernate mode is activated. See
Hibernate mode
section
The heat indicator remains lit until the cooking
positions have cooled down sufficiently.
Note: The cooktop switches off automatically if all
cooking positions have been switched off for more
than 60 seconds and you do not make any settings on
the touch display.
Hibernate mode
As soon as you switch off the hob, Hibernate mode is
activated for a set duration. The lamp above the main
switch flashes. Only after this duration has passed
does the hob switch off completely. During Hibernate
mode, you can switch the appliance on again using
the main switch. The appliance is immediately ready
for use.
Note: To find out how to change the duration of the
Hibernate mode, see section
8
.
Options menu
.
Setting a cooking position
Use the scroll function to set the desired power level.
Power level 1.0
= Lowest power
Power level 9.0
= Highest power
Each power level has an intermediate level. This is
identified with x.5.
Note: To find out how to deactivate the intermediate
Options menu
levels, see section
Setting the power level
The cooktop must be switched on.
Place cookware on the cooking surface.
1
Touch the # symbol of the cooking position in
2
the display. 0.0 lights up in the display.
In the next 4 seconds, slide your finger up and set
3
the desired power level.
K
PLQ
Switching off the cooking position
Slide your finger down until 0.0 appears. The cooking
position switches off and appears as a detected
cooking position after approx. 4 seconds.
.
K
PLQ