Gaggenau VF 230 614 Installationsanleitung Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Kochfeld Gaggenau VF 230 614 herunter. Gaggenau VF 230 614 19 Seiten.

Seite drucken

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

Electric Safety

Before you plug in an electrical cord

WARNING:

or turn on power supply, make sure all controls

are in the OFF position.

If required by the National Electrical Code (or

Canadian Electrical Code), this appliance must be

installed on a separate branch circuit.

WARNING: Risk of electrical shock or fire:

Frame grounded to neutral through a ground

strap. Grounding through the neutral conductor

is prohibited for new branch-circuit installations

(1996 NEC), mobile homes, and recreational

vehicles, or in an area where local codes

prohibit grounding through the neutral

conductor.

For installations where grounding through the

neutral conductor is prohibited,

a) disconnect the link from the neutral,

b) use grounding terminal or lead to ground

unit,

c) connect neutral terminal to lead branch

circuit neutral in usual manner (when the

appliance is to be connected by means of a

cord kit, use a UL listed 4-conductor cord

for this purpose).

Be sure your appliance is properly installed and

grounded by a qualified technician. Installation,

electrical connections and grounding must comply

with all applicable codes.

Before installing, turn power OFF at the service panel.

Lock service panel to prevent power from being

turned ON accidentally.

Installer – show the owner the location of the circuit

breaker or fuse. Mark it for easy reference.

Related Equipment Safety

The appliance is only guaranteed safe to use if

installed by a specialist in accordance with these

installation instructions. The installer is liable for any

damage resulting from incorrect installation.

Remove all tape and packaging before using the

appliance. Destroy the packaging after unpacking the

appliance. Never allow children to play with packaging

material.

Never modify or alter the construction of the

appliance. For example, do not remove leveling legs,

panels, wire covers or anti-tip brackets/screws.

To eliminate the risk of burns or fire by reaching over

heated surface units, cabinet storage space located

above the surface units should be avoided. If cabinet

storage is to be provided, the risk can be reduced by

installing a hood that projects horizontally a minimum

of 5 inches (127 mm) beyond the bottom of the

cabinet.

Verify that cabinets above the cooktop are a maximum

of 13" (330 mm) deep.

When installing a cooktop over a single oven, be sure

to follow both the oven's and cooktop's installation

manuals.