Aircon Off Smart Remote Pro Setup und Gebrauchsanweisung - Seite 10
Blättern Sie online oder laden Sie pdf Setup und Gebrauchsanweisung für Fernsteuerung Aircon Off Smart Remote Pro herunter. Aircon Off Smart Remote Pro 12 Seiten. Universal power saving ac remote control
Seite drucken
Troubleshooting
Blank Screen. Dim Screen, or if your Remote is not Responding
First change batteries. (Never mix new and old batteries together) If after changing batteries
the screen stays blank, the remote needs to be reset/rebooted. Reset the unit by pressing the
recessed "RESET" button on the keypad with a blunt point like a pencil.
Do not use a sharp point like a pin. The remote will not lose its settings when you change batteries
or if you use the reset button, but you will need to reset the clock if required to operate the Time of
Day Off Timer.
Incorrect LCD Display or Unusual Operation.
Reset the unit by pressing the recessed "RESET" button on the keypad with a blunt point like a
pencil. Do not use a sharp point like a pin. The remote will not lose its settings when you use
the reset button but you will need to reset the clock if required to operate the Time of Day Off Timer.
My Air Conditioner has a temperature readout on the front that is different to the Remote
Placebo Display
Some air conditioners have a digital LED temperature readout that shows the temperature setpoint
of the airconditioner. This will of course conflict with the Placebo setting readout on the remote
control. Therefore to use the Placebo effect on AC's like this, you will need to block out this display
on the AC. Lift the front cover of the AC, cover up the temperature readout screen with Black Gaffer
Tape (or similar) and then close the cover again.
During Set Up if the Smart Remote is not operating the AC correctly or if the AC won't turn "Off"
Some codes are quite similar. During Set Up the AC may recognise a "partial" Code and you may
find that only some functions will work correctly. In that case continue pairing steps I and 2 until the
correct code is found. If a particular code turns the AC 'On' but not 'Off' it may be necessary to turn
the AC "Off" by using the AC's original remote if available. Alternatively turn the unit off by using the
Emergency "Off" push button (usually located under the filter cover on the front of the AC wall unit.
(Please refer to your AC owners manual). Or you may turn the power supply to the AC "Off" and
"On" again via the mains supply or circuit breaker. Once the AC is back in standby mode continue
the code search. Repeat Pairing steps 1 and 2 until the correct code is found and the AC
works normally.
If this problem occurs and you are using Auto Search you may have not stopped the auto search
quick enough after the AC switched on. Retrace your steps back a few codes and try again.
During Set Up Keypad Inputs Not Working
If the keypad does not respond to a setting input it may be because the keypad has become locked,
If necessary unlock the Set Up Function again.
During Set Up. If only certain functions are available
If the Smart Remote Pro has been supplied with the Option "Factory Set and Locked" the
Temperature Range and Placebo Function are preset and not adjustable. Only the Pairing Function
will be available.
10