Gaggenau 200 Series Benutzerhandbuch und Installationsanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch und Installationsanleitung für Lüftungshaube Gaggenau 200 Series herunter. Gaggenau 200 Series 20 Seiten. Extractor hood
Auch für Gaggenau 200 Series: Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten)
Seite drucken
7.9 Sensor sensitivity
In automatic mode, a sensor in the appliance detects
the intensity of the cooking and roasting fumes. De-
pending on the setting of the sensor sensitivity, the op-
timum fan setting is automatically switched on. If the
sensor control system reacts too weakly or too
strongly, the setting for the sensor sensitivity may
change.
¡ Factory setting: 3
¡ Lowest setting: 1
¡ Highest setting: 4
7.10 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Note: Colour temperature settings are available in the
Home Connect app provided the appliance has this
function.
Press
.
▶
7.11 Setting the brightness
Press and hold
until the required brightness is
▶
reached.
7.12 Switching on Ambient Light
You can switch on the Ambient Light independently of
the ventilation system.
Press
.
▶
7.13 Ambient Light
Press and hold
until the required brightness is
▶
reached.
7.14 Ambient Light
Requirement: The appliance is switched off.
Press
.
1.
Press
or
repeatedly until the required colour is
2.
set.
7.15 Setting the intermediate position for
the filter cover
On some appliances, the filter cover can be adjusted to
an intermediate position. The intermediate position can
be used to eliminate particularly strong cooking smells
and large amounts of steam.
Take hold of the filter cover in the centre and open it
▶
carefully.
7.16 Saturation indicator
If the grease filters or odour filters are saturated, cor-
responding symbols flash after the appliance is
switched off.
Note: You can set the saturation indicator in the Home
Connect app depending on the filter used.
1
Depending on the appliance specifications
1
1
- Setting the brightness
1
- adjusting the colour
Clean the saturated grease filters and, in doing so, ob-
serve the cleaning instructions in these instructions.
Change the saturated odour filters and observe the in-
structions in the accompanying instructions.
If odour filters can be regenerated, follow the instruc-
tions in the accompanying instructions.
7.17 Resetting the saturation indicator
After cleaning the grease filter or after changing the
odour filter, the saturation indicator can be reset.
Requirements
¡ After the appliance has been switched off,
appears on the display for the grease filter.
¡ After the appliance has been switched off,
appears on the display for the odour filter.
¡ After the appliance has been switched off,
appears on the display for the regenerable odour fil-
ter.
Press and hold
.
▶
a The saturation indicator is reset.
7.18 Switching on the audible signal
Requirement: The appliance is switched off.
To open the setting, press
1.
To switch on the audible signal, press .
2.
To save the setting, briefly press and hold
3.
.
a A signal tone sounds as soon as the selected set-
ting is saved.
7.19 Switching the signal tone off
Requirement: The appliance is switched off.
To open the setting, press
1.
2.
Press
to switch off the audible signal.
To save the setting, briefly press and hold
3.
.
Basic operation en
and 1
and 2
and 3
and
briefly.
and
and
briefly.
and
7