7-BIT Wicher CDTV Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lagerung 7-BIT Wicher CDTV herunter. 7-BIT Wicher CDTV 8 Seiten. 8mb sdram, ide controller
Seite druckenSV1 port location
st
The INT2 signal of the SV1 port should be connected to the 21
pin of the U9 (ODD CIA A) chip, whereas the OVR signal of
th
the SV1 port should be connected to the 29
pin of the U12 (Gary) chip. Both of the aforementioned U9 and U12 chips
should be easy to locate on Amiga's motherboard.
Correctly connected signal cables
CAUTION!!!
Please take special care when installing the PCB board and connecting the signal cables. Incorrect installation may
result in damaging the computer or the turbo card.
When Wicher CDTV card is properly installed, you can finally put it through its paces.
Wicher CDTV
5