Active Tools CoxOrb Platinum Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte Active Tools CoxOrb Platinum herunter. Active Tools CoxOrb Platinum 8 Seiten.

Seite drucken

Selecting Work

Piece to View

Reviewing Work

Piece

Erasing Work Piece

Exiting Recall

Set a Work Piece

Adjusting

Time / Distance

Repeat a Workout

Press INCREASE VOLUME / DECREASE VOLUME.

Work Pieces are labelled with the Time of Day they were

recorded. The highlighted work piece will flash and if you

leave it highlighted for more than 2 seconds it will be

selected. The unit will store 20 work pieces and after that

it will automatically delete the oldest one when a new

one is recorded.

Press INCREASE VOLUME / DECREASE VOLUME.

The parameters configured on the display are recalled

in increasing increments depending on the length of

button press.

SPLIT/CLR cycles through recorded splits, including the

start and end of each Work Piece.

The 'Volume Level Indicator' shows your approximate

location within the Work Piece.

Press & hold SPLIT/CLR for 5 seconds when on the work

piece you wish to remove.

The screen will flash ERASE when preparing to erase and

ERASED when complete.

Press RECALL or START/STOP

Unit will return to home screen in 'STOP' mode.

Workouts

Press RECALL twice to select 'PIECE' .

Once selected 'DIST' will flash for workouts in metres and

if you press 'RECALL' again 'TIME' will flash for workouts

in minutes. When you leave one of them flashing for 2

seconds it will be selected.

Press INCREASE VOLUME / DECREASE VOLUME.

Once you have selected 'DIST' or 'TIME' the INCREASE

VOLUME and DECREASE VOLUME buttons can be used

to adjust the time/distances of the piece in 30 second/50

metre increments. Once you have selected your desired

distance/time leave it flashing for 2 seconds, the unit wll

then display 'SET' and return to the main screen in 'STOP'

mode.

Press RECALL three times.

To repeat a workout, start with the unit in 'STOP' mode

and press the 'RECALL' button three times to select

'RPtPIECE' . The unit will then display the last workout

followed by 'SET' and return to the main screen in 'STOP'

mode.