70mai A810 Series Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Dash Cameras 70mai A810 Series herunter. 70mai A810 Series 11 Seiten. Dash cam 4k

Installation

1. Installing the

electrostatic sticker

Paste the electrostatic sticker

on the recommended area on

the front windshield. Press the

sticker to remove air bubbles

out.

Avoid the edge of the windshield and select the flat and

smooth area for the installation.

Note: Keep windshield clean and dry without liquid residue to

prevent the sticker from losing adhesion and dash cam from

dropping.

2. Installing the mount

Attach the mount into the mount

slot and slide up.

3. Installing the memory card

Insert the memory card into the card

slot.

4. Mounting the dash cam

Paste the dash cam onto the

electrostatic sticker.

5. Routing cable

Route the power cord to the

cigarette lighter and connect

power.

Notes:

•

Use the included wiring trim tool to hide the power cord

underneath the vehicle's headliner and rubber seal along the

A-pillar.

•

Depending on the vehicle, the cigarette lighter socket may

be located in a different position. The above figure is for

reference only.

6. Adjusting the camera angle

Turn on the dash cam and adjust the

camera angle based on the preview

screen.