Gaggenau AW 543-120 Betriebs- und Montageanleitung - Seite 18

Blättern Sie online oder laden Sie pdf Betriebs- und Montageanleitung für Lüftungshaube Gaggenau AW 543-120 herunter. Gaggenau AW 543-120 20 Seiten.

Fig. 21

Fig. 22

– Secure the hood on the wall with the four screws

b (Fig. 21).

For

exhaust air mode proceed as follows:

– Establish the pipe connection.

– Establish the electrical connection.

– Stainless steel chimney only (LK 010-012/022):

pull the protective film off the chimney's trims.

Note: avoid damaging the sensitive metal surfaces.

– Fit the top chimney duct unit into the base. Make

sure that the fastening holes on the side are at the

top.

– Put both chimney duct units onto the hood.

– Pull the top chimney duct unit up into its final

position and secure it with 2 screws on the ceiling

holder (Fig. 22).

Note: avoid scratches when pulling the elements

apart by placing the assembly template, for

example, over the edge of the bottom chimney

paneling to protect it.

– Reinsert the grease filters.

– Place the glass plates on the appliance with the

printed side facing down.

Note: when putting the glass trays in place, make

sure that you do not scratch the chimney.