Gaggenau SP 483 Betriebs- und Montageanleitung - Seite 18

Blättern Sie online oder laden Sie pdf Betriebs- und Montageanleitung für Kochfeld Gaggenau SP 483 herunter. Gaggenau SP 483 19 Seiten. Electronic glass-ceramic hob with control panel

Seite drucken

Installing the hob

5080009628

en 06.05 EB

• Before connecting the hob, make sure the

electricity is switched off at fuse point!

• Open the lid of the connecting terminal on the

hob. Secure the mains connecting lead as shown

in the connection diagram. Secure the connecting

lead with the pull relief. The mains connecting

cable must at least correspond to the type

H 05 VV-F . Close the lid of the connecting terminal.

• Firmly plug the connecting cable in the hob.

• Guide the cables into the cut-out. Insert the hob

with the display panel front right into the cut-out

and align it.

Note: do not stick the hob onto the worktop with

silicone.

• Firmly plug the connecting cable in the control

panel.

• Secure the appliance on the worktop with the

clamping screws included. Do not tighten the

clamping screws too tightly, as a uniform sealing

gap should be left all round.

• Connect the appliance to the electricity. Test it for

correct functioning. If the appliance does not work,

check, if the connecting cable between the

control panel and the hob is firmly plugged in.

• Fit the intermediate shelf.