Hi-Tech 0801 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Blender Hi-Tech 0801 herunter. Hi-Tech 0801 6 Seiten.

Seite drucken

Marking point on

squeezing body cover

Marking point on

squeezing cup

5. Install the squeezing body cover

① When it is installed downwards, the marking

point on squeezing body cover shall align

with that on the squeezing cup.

②③ Make " " at the back of the protruding part

of squeezing body cover rotate towards

" " on squeezing cup in clockwise direction

and lock.

6.See the ﬁgure. Make the two juice/marc receiving

cups put at the appropriate position: one is used to

receive juice, and another is used to receive marc

(the two cups have the same overall dimension).

Rubber pad installation

1. Before the juice cup is installed, please conﬁrm whether the rubber pad of the marc

outlet at the bottom of the juice cup is properly installed.

Make the rubber pad of marc outlet inserted into the rectangular slot.

Make the rubber pad of marc outlet properly inserted.

Notes:

The rubber pad must be properly installed, otherwise leakage

phenomenonmay occur.

Rubber pad

Turn on the switch (forward)

Corotation

Forward: Make fruits and vegetables pushed

Stop

Reverse

downwards for squeezing.

Reverse: Fruits and vegetables return upwards

Press

Notes:

Please don't use wet hand operate

Reverse

Forward

switch Before put into fruits and vegetable,

don't let unit run free, Otherwise it may

damage the unit.

Make the clean fruits and vegetables (if the size of the

fruits and vegetables is larger than that of the feed in-

let, please make them cut into the blocks with proper

size) put into the feed inlet, and make the pushed in-

wards by the pushing rod.

Pushing rod

Notes: Please use fresh fruits and vegetables

to make the juice. The stale fruits and

Feed inlet

vegetables that have been stored in

refrigerator for a long time shall be used after

being immersed in cold water for over 10min.

* The kernel of fruits must be removed.

If the machine stops suddenly during operation, press

offﬁrstly, and then press the "reverse" button to make

the materials in the auger pushed upwards; and then

press "forward" button (repeat the process for about 3

times).

*During "reverse" of the machine, please use hands to

press the feed tube slightly (prevent loosening of the

cover).

*If the juicer still does not run after the aforesaid

operation, please disassemble the squeezing cup for

cleaning, and then try the juicer again.

*The hard materials (such as carrot) must be cut into

strips, otherwise hard materials maybe damage juicer.

Corotation

After the squeezing process is completed, please

Stop

Reverse

press the stop switch, and pull out the power plug.

Press

Notes:

Please do not store the squeezed

Reverse

Forward

juice for a long time.

The machine is inapplicable to crush grains (motor

clamp and mechanical failure are liable to be caused).