Hi-Tech 22-225 Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Säge Hi-Tech 22-225 herunter. Hi-Tech 22-225 16 Seiten.

Before you make the first cut, line up your

rock or glass properly with the saw blade.

Lightly slide the material into the saw blade

until a groove forms, then push the material

firmly through the saw blade. Do not attempt

to cut curves with the trim saw, it is designed

to cut straight lines only. As you near the end

of the cut, reduce pressure to avoid a sudden

"break-through". Reducing pressure also gives

you a cleaner cut. Note: Never force a saw blade,

let the blade do the work.

This trim saw is to be used for trimming

smaller material. The rocks and glass you are

cutting should never exceed more than 2/3 the

size of the visible cutting area of the saw blade.

The blade height of the 4" Trim saw is 1". This

measurement is taken from the saw table to the

top of the saw blade (Fig. D).

CUTTING TIPS

Fig. D

Some saw blades are sintered, continuous

rim blades that may require a "dressing".

This means that the diamonds embedded into

the sintered matrix of the saw blade are wearing

down, and the metal, sintered matrix surrounding

the diamonds are deforming over them. The

metal, sintered matrix needs to be abraded

away to expose the diamond surface. Dress and

sharpen your sintered saw blades with aluminum

oxide, a silicon carbide stone, dressing stick

or brick. Simply run 3-4 times through the saw

blade for a quick fix. Note: Always abide by the

instructions that come with your saw blade. Not all

saw blades should be dressed or sharpened, as it

can ruin the saw blade.