75F HYPERSTAT HS3600 Installationshandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Installationshandbuch für Brand- und Rauchschutzklappen 75F HYPERSTAT HS3600 herunter. 75F HYPERSTAT HS3600 11 Seiten.
Seite drucken|
MOUNTING
Some of the sensors on the HyperStat are location dependent, make sure that the HyperStat faces the
room when using occupancy, make sure the device is not exposed to direct sunlight or is facing a very
dark corner of the room when using Dynamic Light Balancing.
Mounting Instructions:
• Place the HyperStat Interface (Conventional/ P1P2) and the back plate on the gang box such that
back plate covers the gang box (only when the gang box is fixed vertically) and fix the two items
to the wall gang box with the PHP screws provided in the box.
• Align the HyperStat main to lock onto the HyperStat Interface-Conventional.
• Use the Allen head screws to make this entire setup tamper-proof.
• Fix the rubber covers 1 and 2 to cover the programming pins.
HyperStat HS3600/DKN509 - Mounting:
Position No.
Part Detail
1
HyperStat Interface - Conventional
2
HyperStat Main
3
Allen head screws
4
Rubber cover 1
HyperStat DKN509 P1P2 Base and Plus - Mounting:
Position No.
Part Detail
1
HyperStat Interface- P1P2
2
HyperStat Main
3
Allen head screws
4
Rubber cover 1
Position No.
5
6
7
8
Position No.
5
6
7
8
+1 888 612 7575 (USA) or 1800 121 4575 (INDIA)
support75F.io|
Part Detail
Rubber cover 2
Gang Box
PHP screws
Back plate
Part Detail
Rubber cover 2
Gang Box
PHP screws
Back plate