75F Smart Damper Anweisungen für Installation und Betrieb - Seite 2
Blättern Sie online oder laden Sie pdf Anweisungen für Installation und Betrieb für Brand- und Rauchschutzklappen 75F Smart Damper herunter. 75F Smart Damper 3 Seiten.
Seite drucken
|
MOUNTING
Mount the Smart Damper.
To minimize air noise, the Damper should
be installed as near to the trunk line as is reasonable. Install the
damper whatever direction is convenient. Be sure that the Smart
Node is easily accessible as you will need access to it. Each end of the
damper should be secured using at least three screws spaced evenly
around the circumference. Flex duct can be secured using a zip tie.
|
WIRING
Secondary
Primary
Fig.1
Powering the Smart Damper Smart Node.
Using the correct polarity,
plug the 24VAC 18/2AWG coming from either the transformer or from
the previous Smart Node of a different zone. Color code so that red is
always in the ~ port. Strip back 18/2AWG wire ~1/2" and insert until
wire is locked in place.
www.75f.io
888.590.8995 x2