76 PROJECTS TT MOUNT 3.0 Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Zubehör für Fahrräder 76 PROJECTS TT MOUNT 3.0 herunter. 76 PROJECTS TT MOUNT 3.0 2 Seiten. Computer mount

Seite drucken

STEP ONE

Attach Computer to mount,

undo straps and choose

approx position of mount for

optimum viewing.

STEP THREE

Using 2.5mm allen key replace both

side screws and add spacers as

required.

Loosely secure screws to allow

brackets to freely rotate and move

during next step.

STEP FOUR

Place mount into desired

position, thread straps

through each bracket.

Pull vertically to

remove slack and

smooth down velcro.

STEP TWO

Mark position of bracket

and measure width of bar

centres.

Use guide to calculate

screws and spacers

required.

IMPORTANT

ENSURE SCREWS ENGAGE

THROUGH NUT BODY

STEP FIVE

Align head of mount to

desired angle, tighten each

screw ﬁnger tight or until

resistance is felt.

Re adjust straps if

necessary.

Excess straps may

be cut for a neat

ﬁnish.

? MM

2.5mm

.COM