GREAT PLAINS Nutri-Pro NP1330AA Installationsanleitung Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Landwirtschaftliche Geräte GREAT PLAINS Nutri-Pro NP1330AA herunter. GREAT PLAINS Nutri-Pro NP1330AA 10 Seiten. Pull-type 3-section anhydrous shank
Auch für GREAT PLAINS Nutri-Pro NP1330AA: Einstellung Handbuch (6 seiten)

Seite drucken

Nutri-Pro Tire Scraper

2 Medium Gauge Wheel

These instructions are for installing the tire scraper

to a medium gauge wheel.



If your gauge wheel does not have the two

mounting holes (1), follow the instructions at

step 2a to install the tire scraper to the gauge

wheel arm.



If your gauge wheel does have the two mounting

holes, go to step 2b for instructions to bolt the

tire scraper to the gauge wheel arm.

2a. Installing to Medium Gauge Wheel Arm

without Mounting Holes

Position the locator mount (25) over the axle lock

plate (2) and align the edges as shown.

68234B

Position the mount plate (23) on the locator mount as

shown.

Fire Hazard:

Welding can create sparks. Perform the work away from

flammable materials. Wear suitable protective equipment.

Allow hot parts to cool before continuing work.

Tack weld along the top of the mount plate to hold it

in position.

Remove the locator mount.

Weld (

places on the top of the mount plate and two places

on the bottom.

Clean off any slag and weld splatter. Allow the welds

to cool. Paint green.

68232

inch fillet weld, about 1

Great Plains | 427-051M

68235b

inch long) at two

68236B