Dynabrade 52904 Sicherheit, Betrieb und Wartung - Seite 8
Blättern Sie online oder laden Sie pdf Sicherheit, Betrieb und Wartung für Bohrer Dynabrade 52904 herunter. Dynabrade 52904 9 Seiten. .4 hp vacuum drill; pistol grip / central vacuum / rear exhaust
Seite drucken
FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES @ WWW.DYNABRADE.COM
®
Dynaswivel
•
Swivels 360° AT TWO PIVOT POINTS allowing the air hose to
drop directly to the floor while providing superb tool handling.
Part No. 94300 – 1/4" NPT
Motor Tune-Up Kit
•
Includes assorted parts to help maintain and repair motor.
Part No. 96067
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer with greater
power and less down time.
Part No. 95821: 4oz. (118 ml)
Part No. 95842: 1pt. (473 ml)
Part No. 95843: 1gal. (3.8 L)
Bearing Removal Tool
•
This tool is designed to pass through the I.D. of the bearing
plate and push against the I.D. of the bearing.
Part No. 96210
Portable Vacuum Systems
•
Dynabrade offers a wide assortment of
vacuuming options to choose from. To help
make your selection please request the most
current portable vacuum systems literature
form your local representative or by searching
our web site.
Reference Contact Information
1. American National Standards Institute – ANSI
25 West 43
rd
Street
Forth Floor
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1419 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2009
Optional Accessories
3. European Committee for Standardization
Rue de Stassart 36
B - 1050 Brussels, Belgium
4. Power Tool Institute, Inc.
P.O. Box 818
Yachata, Oregon 97498-0818
Tel: 1 (503) 547-3185
Fax: 1 (503) 547-3539
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
PRINTED IN USA
Hex Key
•
This is used for the removal and installation of
the 52954 Spindle Nut
Part No. 95049 – 3/16"
Open End Wrench
•
This is used for removal and installation
of drill chuck.
Part No. 96453 – 16 mm
Grease
•
Multi-purpose grease for all types of
bearings, cams, gears.
•
High film strength; excellent resistance
to water, steam, etc.
•
Workable range 0˚ F to 300˚ F.
Part No. 95542: 10oz. Grease Tube
Part No. 95541: Push-Type Gear Oil Gun
•
One-hand operation.
Bearing Press Tool
•
Use with (#2) arbor press to achieve accurate
press of bearings and motor parts.
Part No. 96240
Part No. 96244
Part No. 96216
Part No. 96239
2" Bearing Separator
•
Used to remove bearings, gears, and other components.
Part No. 96346
Email: [email protected]
®
DYNABRADE
PD09.61_rev.1_12/09