Dynabrade 61303 Betriebshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Staubsauger Dynabrade 61303 herunter. Dynabrade 61303 6 Seiten. Portable vacuum system
Auch für Dynabrade 61303: Betriebshandbuch (6 seiten)

Seite drucken

This unit must be grounded. If it should malfunction or breakdown,

grounding provides a path of least resistance for electric current to

reduce the risk of electric shock.

WARNING

Refer to the drawing and parts list for the name and location of parts.

1. While opening the carton, carefully inspect outside of the

carton for any sign of transportation damage, and if so, notify

your shipper immediately.

2. Open carton and remove hoses, hose connectors and other

accessories.

3. Lay carton on its back and wheel the unit out.

4. Remove all packing, release the unit and remove

Motorhead/Vacuum Head Assembly to make sure no packing

materials are left inside the unit.

5. Check to make sure the filter is seated firmly. If not, tighten at

base of filter unit.

7. Remove the vacuum hose assembly. Note that the air supply

tube (the smaller of the two) protrudes at both ends and is

longer than the vacuum hose.

8. Connect quick coupler male end to air outlets located on

vacuum head assembly.

9. Insert vacuum hoses.

10. Connect air supply to air inlet fitting (1/4" NPT female threads)

located at the back side of Motorhead. Air pressure should be

adjusted according to the pressure requirement of the air tools

CAUTION

The following items should be well-noted for the effective use of the unit.

1. Always wear safety glasses and any other safety items

required by law.

2. The vacuum system will operate by an on/auto/manual switch

located on the front of the Motorhead/Vacuum Head Assembly.

This switch must be turned on to activate the Motorhead.

3. VACUUM SPEED CONTROL: Unit is equipped with a rheostat

motor control. Infinitely adjustable speed allows suction

regulation for wide range of tools.

G R O U N D I N G I N S T R U C T I O N S

Grounding by means of a ground wire between both ends of the air supply tubing

passing through vacuum hose is recommended.

A S S E M B LY I N S T R U C T I O N S

THIS IS A PRECISION PIECE OF EQUIPMENT designed for dust extraction to keep your ENVIRONMENT

and your REPUTATION "DUST-FREE." Read operating instructions before using Dynabrade Portable

Vacuum System and be thoroughly conversant with safety precautions in your locality.

O P E R AT I N G I N S T R U C T I O N S

Where it is critical to avoid shocks or sparks caused by static

electricity, an electrically conductive and grounded air supply

hose must be used.

you are using. Do not exceed 150 PSIG (10.3 kg/cm

pressure drop is unavoidable between the main air supply and

the air tools due to internal flow resistance in a long air hose.

Air pressure of 20 to 30 PSIG (1.4 to 2.0 kg/cm2) higher

than the air pressure specified for the air tool being used

is recommended.

The installation of a Dynabrade Filter-Regulator-Lubricator

(FRL Part No. 11411) is highly recommended to protect the

unit and the air tools.

Where it is critical to avoid shocks or sparks caused by

static electricity, an air supply hose which is electrically

conductive and ground must be used.

11. All Dynabrade Vacuum Models come with a sample dust bag.

Install bag inside main body. Make sure that vacuum

connection tube protrudes through the hole in the bag.

12. Order dust bags (Part No. 64682) before you run out of them.

13. Return Motorhead/Vacuum Head Assembly to the unit and lock

the two rim clamps to secure Motorhead/Vacuum Head

Assembly in position.

14. Connect your Dynabrade air tool or accessory and you are now

ready for working with the Dynabrade Portable Vacuum System.

4. ELECTRONIC THERMAL PROTECTION DEVICE: Unit is

equipped with a overload prevention system. If this feature is

activated a 20 MIN. COOL DOWN PERIOD inhibits use. After a

complete 20 min. cool down period has passed the Electronic

Thermal Protection Device will RE-SET automatically and

the unit will be on line ready for use.

5. VISUAL WARNING SIGNAL: Unit is equipped with a visual

warning (yellow) light to indicate when air velocity falls below

20m/s. Turn off vacuum and replace disposable collection bag.

The warning signal will RE-SET automatically and the unit will

be ready for use.

PAGE 2

). Some