Dynabrade 61305 Betriebshandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Staubsauger Dynabrade 61305 herunter. Dynabrade 61305 6 Seiten. Portable vacuum system
Auch für Dynabrade 61305: Betriebshandbuch (6 seiten)
Seite druckenThis unit must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to
reduce the risk of electric shock.
WARNING
Refer to the drawing and parts list for the name and location of parts.
1. While opening the carton, carefully inspect outside of the
carton for any sign of transportation damage, and if so, notify
your shipper immediately.
2. Open carton and remove hoses, hose connectors and other
accessories.
3. Lay carton on its back and wheel the unit out.
4. Remove all packing, release the unit and remove
Motorhead/Vacuum Head Assembly to make sure no packing
materials are left inside the unit.
5. Check to make sure the filter is seated firmly. If not, tighten at
base of filter unit.
7. Remove the vacuum hose assembly. Note that the air supply
tube (the smaller of the two) protrudes at both ends and is
longer than the vacuum hose.
8. Connect quick coupler male end to air outlets located on
vacuum head assembly.
9. Insert vacuum hoses.
10. Connect air supply to air inlet fitting (1/4" NPT female threads)
located at the back side of Motorhead. Air pressure should be
adjusted according to the pressure requirement of the air tools
you are using. Do not exceed 150 PSIG (10.3 kg/cm
pressure drop is unavoidable between the main air supply and
the air tools due to internal flow resistance in a long air hose.
CAUTION
The following items should be well-noted for the effective use of the unit.
1. Always wear safety glasses and any other safety items
required by law.
2. The vacuum system will operate by an on/auto/manual switch
located on the front of the Motorhead/Vacuum Head Assembly.
This switch must be turned on to activate the Motorhead.
3. VACUUM SPEED CONTROL: Unit is equipped with a rheostat
motor control. Infinitely adjustable speed allows suction
regulation for wide range of tools.
G R O U N D I N G I N S T R U C T I O N S
Grounding by means of a ground wire between both ends of the air supply tubing
passing through vacuum hose is recommended.
A S S E M B LY I N S T R U C T I O N S
2
). Some
THIS IS A PRECISION PIECE OF EQUIPMENT designed for dust extraction to keep your ENVIRONMENT
and your REPUTATION "DUST-FREE." Read operating instructions before using Dynabrade Portable
Vacuum System and be thoroughly conversant with safety precautions in your locality.
O P E R AT I N G I N S T R U C T I O N S
Where it is critical to avoid shocks or sparks caused by static
electricity, an electrically conductive and grounded air supply
hose must be used.
Air pressure of 20 to 30 PSIG (1.4 to 2.0 kg/cm2) higher
than the air pressure specified for the air tool being used
is recommended.
The installation of a Dynabrade Filter-Regulator-Lubricator
(FRL Part No. 11411) is highly recommended to protect the
unit and the air tools.
Where it is critical to avoid shocks or sparks caused by
static electricity, an air supply hose which is electrically
conductive and ground must be used.
11. All Dynabrade Vacuum Models come with a sample dust bag.
Install bag inside main body. Make sure that vacuum
connection tube protrudes through the hole in the bag.
12. Order dust bags (Part No. 64682) before you run out of them.
13. Return Motorhead/Vacuum Head Assembly to the unit and lock
the two rim clamps to secure Motorhead/Vacuum Head
Assembly in position.
14. Connect your Dynabrade air tool or accessory and you are now
ready for working with the Dynabrade Portable Vacuum System.
4. ELECTRONIC THERMAL PROTECTION DEVICE: Unit is
equipped with a overload prevention system. If this feature is
activated a 20 MIN. COOL DOWN PERIOD inhibits use. After a
complete 20 min. cool down period has passed the Electronic
Thermal Protection Device will RE-SET automatically and
the unit will be on line ready for use.
PAGE 2