DYNABREEZE FA-23259 Benutzerhandbuch & Garantie - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch & Garantie für Fan DYNABREEZE FA-23259 herunter. DYNABREEZE FA-23259 8 Seiten. Industrial strength power fan
Seite druckenELECTRICAL REQUIREMENTS &
SPECIFICATIONS
ELECTRICAL REQUIREMENTS
Voltage:
Australia
220V -
240V
WARNING: This appliance must be earthed.
IMPORTANT: The wires in this fans mains
lead are coloured in accordance with the
following code:
Green and Yellow: Earth
Blue:
Brown:
EXTENSION CABLES
If an extension cable is to be used, it is
recommended that a splash proof cable
connector be fi tted and that this connector
be kept clear of any water.
Since the cable will produce a voltage
drop, it is essential that the wiring in the
cable conforms the following minimum
specifi cations:
0-25metre cable length = 1.5mm wire
25-50metre cable length = 2.5mm wire
SPECIFICATIONS
Diameter:
Speed:
200mm
2800rpm
Frequency:
Power:
180W
50/60Hz
Neutral
Live
Air Delivery:
25M
3
/min
USING YOUR DYNABREEZE FAN
UNPACKING AND FIRST USE
1. Unpack the unit from box that your
unit was purchased in and recycle the
packaging if possible.
2. Check that all the parts are included on
the unit and nothing is broken. If you
require assistance, please contact the
place of purchase.
3. Read and follow this manual and adhere
to all safety precautions.
4. Plug the power cable into a suitable
power outlet and switch on the power
outlet.
5. Turn On the fan using the On/O switch
located under the carry handle.
6. Turn O the fan using the On/O switch,
then turn o at the mains power switch.
MAINTENANCE AND CARE
Before each use, check the unit for damage
to ensure the body and cable are completely
sound.
Periodically inject a few drops of grease into
the moving parts and ensure the bearings are
oiled. Inspect the paintwork and touch up
where necessary with rust resistant paint.
Store this unit in a clean dry environment.
USER MANUAL & WARRANTY 5