Aircraft in Miniature Limited Transport Wings DC-10-30 Anleitung Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Spielzeug Aircraft in Miniature Limited Transport Wings DC-10-30 herunter. Aircraft in Miniature Limited Transport Wings DC-10-30 20 Seiten.

Seite drucken
1
GENERAL
WARNINGS 1 - THIS KIT CONTAINS SMALL AND/OR SHARP
A
A keel is provided to give structural strength to the fuselage - it is
important that you use it because of the size of the model.
B
All parts must be cut and/or sanded to the correct profile.
C
Large vacuum formed parts can have blemishes from the forming
process. Check all external surfaces and fill these blemishes before
painting the model.
D
The plastic is thick enough to let the modeller sharpen the edges of
aerofoils, which can be slightly rounded from the vacuum forming.
2
PREPARATION
A
Carefully remove any flash or casting seams from all the metal and
resin parts.
B
Make the three sets of landing gear bay components from the 2 mm
plastic sheet supplied .
3
HORIZONTAL STABILIZER AND FUSELAGE SUB-ASSEMBLIES
A.
HORIZONTAL STABILIZER (TAIL PLANE)
(1) Sand the tail plane parts to the correct shape.
(2) Cement the top and bottom halves of the tailplane together.
(3) When the tailplane is dry, file and sand the Leading and trailing
edges to shape.
(4) Apply any filler that is necessary and sand to shape when the
filler is hard.
(5) Scribe any panel detail as required, then polish the tail plane.
(6) Put the tail plane aside until required.
B

FUSELAGE ASSEMBLY

(1) Sand the left and right fuselage halves and the keel to the
correct shape.
All manuals and user guides at all-guides.com
PARTS. KEEP THE CONTENTS OF THE KIT AWAY
FROM CHILDREN.
2 - THIS KIT CAN CONTAIN PRECUT PARTS WITH
SHARP EDGES OR CORNERS. BE CAREFUL
WHEN YOU HANDLE THESE PARTS BECAUSE
THEY CAN CAUSE CUTS OR OTHER INJURIES.
3 - USE ALL SOLVENTS, PAINTS, FILLERS AND
OTHER MATERIALS IN ACCORDANCE WITH THE
MANUFACTURER'S INSTRUCTION. OBEY ALL
SAFETY WARNINGS.
.