GREAT PLANES F4U Corsair Gebrauchsanweisung - Seite 11
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Spielzeug GREAT PLANES F4U Corsair herunter. GREAT PLANES F4U Corsair 16 Seiten. Arf plane
Seite drucken
Radio and Battery Installation
❏
1. Attach the "Hook," or rough side, of the supplied hook
and loop tape to the battery tray inside the radio
compartment. Attach the "loop," or soft side, of the hook and
loop tape to the underside of the battery. Install the battery
as shown.
❏
2. Using leftover hook and loop tape, or double sided
servo tape, mount the receiver in the radio compartment.
❏
3. Connect the electronic speed control (ESC) and
elevator servo to the receiver.
❏
4. Connect a 6" [153mm] servo extension to the aileron
channel on your receiver. Route the extension below the
radio tray and out the middle hole in the leading edge of the
wing saddle as shown in the photo.
❏
5. Drill a 1/16" [1.6mm] hole in the side of the fuse near
the receiver. The exact location is not important. Route the
antenna out of this hole and along the fuse side. Make sure
you have a strain relief on the antenna where it exits the
fuselage to keep the pressure off of the solder joints in the
receiver. Secure the antenna to the fuselage with clear tape.
❏
6. Reinstall the battery hatch.
11