GREAT PLANES PBY Catalina Gebrauchsanweisung - Seite 3
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Spielzeug GREAT PLANES PBY Catalina herunter. GREAT PLANES PBY Catalina 20 Seiten. Arf
Seite drucken
PROTECT YOUR MODEL, YOURSELF
& OTHERS...FOLLOW THESE
IMPORTANT SAFETY PRECAUTIONS
1. Your PBY Catalina should not be considered a toy, but
rather a sophisticated, working model that functions very
much like a full-size airplane. Because of its performance
capabilities, the PBY Catalina, if not assembled and operated
correctly, could possibly cause injury to yourself or spectators
and damage to property.
2. You must assemble the model according to the instructions.
Do not alter or modify the model, as doing so may result in an
unsafe or unfl yable model. In a few cases the instructions may
differ slightly from the photos. In those instances the written
instructions should be considered as correct.
3. You must take time to build straight, true and strong.
4. You must use an R/C radio system that is in fi rst-class
condition, and a correctly sized motor and components
throughout the building process.
5. You must correctly install all R/C and other components so
that the model operates correctly on the ground and in the air.
6. You must check the operation of the model before every
fl ight to insure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
clevises or other connectors often and replace them if they
show any signs of wear or fatigue.
7. If you are not an experienced pilot or have not fl own
this type of model before, we recommend that you get the
assistance of an experienced pilot in your R/C club for
your fi rst fl ights. If you're not a member of a club, your local
hobby shop has information about clubs in your area whose
membership includes experienced pilots.
We, as the kit manufacturer, provide you with a top quality,
thoroughly tested kit and instructions, but ultimately the
quality and fl yability of your fi nished model depends
on how you build it; therefore, we cannot in any way
guarantee the performance of your completed model,
and no representations are expressed or implied as to
the performance or safety of your completed model.
Remember: Take your time and follow the instructions to
end up with a well-built model that is straight and true.
LITHIUM BATTERY
HANDLING & USAGE
WARNING!! Read the entire instruction sheet included with
the battery. Failure to follow all instructions could cause
permanent damage to the battery and its surroundings, and
cause bodily harm!
• ONLY use a LiPo approved charger. NEVER use a NiCd/
NiMH peak charger!
• NEVER charge in excess of 4.20V per cell.
• ONLY charge through the "charge" lead. NEVER charge
through the "discharge" lead.
• NEVER charge at currents greater than 1C.
• ALWAYS set charger's output volts to match battery volts.
• ALWAYS charge in a fi reproof location.
• NEVER trickle charge.
• NEVER allow battery temperature to exceed 150° F (65° C).
• NEVER disassemble or modify pack wiring in any way or
puncture cells.
• NEVER discharge below 2.5V per cell.
• NEVER place on combustible materials or leave unattended
during charge or discharge.
• ALWAYS KEEP OUT OF REACH OF CHILDREN.
DECISIONS YOU MUST MAKE
This is a partial list of items required to fi nish the PBY Catalina
that may require planning or decision making before starting
to build. Order numbers are provided in parentheses.
Radio Equipment
❏
4-Channel Radio (such as the Futaba
❏
Micro Receiver (If you choose to, a standard size receiver
will fi t in the radio compartment)
❏
Two S3103 Micro-Mini Servos (FUTM0037) for the ailerons
(or an equivalent servo with 17 oz-in of torque and servo
case dimensions of 0.9" x 0.4" x 0.8" [22 x 11 x 20mm])
❏
Two S3110 Micro Servos (FUTM0046) for the elevator and
rudder (or an equivalent servo with 22 oz-in of torque and servo
case dimensions of 0.9" x 0.4" x 0.8" [22 x 11 x 20mm])
❏
Two 6" [150mm] Servo Extensions (HCAM2701 for Futaba)
❏
Two Servo Y-Harnesses (HCAM2751 for Futaba)
Motor, Speed Control and
Battery Recommendation
❏
Two RimFire Brushless 28-30-950 Motors (GPMG4560)
❏
Two ElectriFly SS-25 Speed Controls (GPMM1820)
❏
One Deans U Parallel ESC adapter (GPMM3141)
❏
ElectriFly Power Series Lithium Polymer Battery.
2100mAh 11.1 Volt (GPMP0617), 3200mAh 11.1 Volt
(GPMP0623) or equivalent
❏
ElectriFly PolyCharge
3
®
4EXA)
™
4 Battery Charger (GPMM3015)