HiB Celeste 73105400 Schnellstart-Handbuch
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Körperpflegeprodukte HiB Celeste 73105400 herunter. HiB Celeste 73105400 2 Seiten.
Seite drucken
This product is suitable for installation in zones:
&
2
Outside Zone
All installations must comply with guidelines which are based on a zonal
concept. The diagram above illustrates this concept and must be followed
to ensure the safe installation of electrical appliances in the bathroom.
These regulations apply to domestic installations only. Installations must be
made in accordance with the current IEE wiring regulations and relevant
building regulations. HiB recommends that all electrical bathroom
products should only be fitted by a suitably qualified, Part P registered
electrician.
Mounting Points Diagram (Fig. A)
REAR VIEW
mounting points
electrical input
Portrait & Landscape options
available on Hannah mirror only
T:
+44 (0)20 8441 0352
F:
+44 (0)20 8441 0219
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the
interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
(Fig. 1)
to mains
to mains
REAR VIEW
mounting points
alternate mouting points
electrical input
E:
Illuminated Mirrors
Hannah
Art No.
73106200
Lunar
Art No.
73104395
Duna
Art No.
73104195
Solar
Art No.
73104095
Aaron
Art No.
73105900
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to
them during installation to ensure that your product is fitted safely
and that it retains its high quality finish.
Please retain this leaflet for future reference.
Before installation, ensure the domestic electrical mains supply
to which the mirror is to be connected is turned off. Before
drilling, ensure that there are no hidden cables or pipes in the
wall.
Installation
NB. This product must be installed with a minimum of 150mm between the
sensor and any adjacent wall or object to ensure correct operation of the
switch.
1.
Position the mirror in a suitable location (according to the zonal
diagram, Fig 1), ensuring that the domestic electrical mains
supply is within reach of the electrical entry point of the product.
2.
Carefully mark the position of the mirror using a soft pencil.
3.
Remove the mirror and mark the mounting points according
to the diagram on the left. Please ensure that all marked
mounting points accurately match up with the fixing points
on the mirror. Please note that only the Hannah mirror is
mountable in landscape and portrait configurations.
4.
Before drilling, ensure there are no hidden cables or pipes
behind the mounting points. Using a masonry drill, drill holes in
the marked positions to a suitable depth. If drilling through tile,
use a ceramic drill bit.
5.
Insert wall plugs level with the surface of the wall. If fitting to a
tiled surface, wall plugs should be inserted below the tile surface
to avoid cracking. NB. For plasterboard walls, specialist fixings
should be purchased, available from any DIY or hardware store.
Screw hook screws into wall plugs.
6.
Rain, Celeste, Keo & Aztec only: Attach shelf to mirror using
the fixings provided. Care must be taken not to overtighten
screws to prevent damage.
7.
Ensure the domestic electrical mains supply to which the mirror
is being connected is turned off. Connect the domestic mains
supply to the terminal box as per the wiring diagram (Fig A).
8.
Hang the mirror in position.
hib.co.uk
FI#01 008 R151124
Rain
Art No.
73105200
Celeste
Art No.
73105400
Keo
Art No.
73106000
Aztec
Art No.
73105300
Ver No.
1.0 Jan 2016