Automate AM6.2 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Autoalarm Automate AM6.2 herunter. Automate AM6.2 17 Seiten.

NOTE: In order for the ignition controlled doorlocks to work the feature

must be turned on in programming.

NOTE: If the ignition is turned on while the vehicle is remote started the

doors will not lock until the remote start shuts off. To avoid being locked

out of the vehicle, do not turn the ignition on until you are ready to drive

the vehicle.

Remote Start

This feature allows you to remotely start and run your vehicle for

a programmable period of time. This makes it possible to warm up

the engine, as well as adjust the interior temperature of the vehi-

cle with the climate control system. If interior heating or cooling

is desired, the climate controls must be preset, and the fan blower

must be set to the desired level prior to remote starting the

vehicle.

IMPORTANT! (1) Never remotely start the vehicle with the vehicle in gear,

and (2) Never remotely start the vehicle with the key in the ignition.

If power door locks have been

connected to your system, the

vehicle's door will lock three

seconds

ignition has been turned on

and unlock when the ignition

is turned off.

after

the