HIBLOW HP Series Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Teichpumpen HIBLOW HP Series herunter. HIBLOW HP Series 9 Seiten.
Auch für HIBLOW HP Series: Handbuch (5 seiten), Handbuch (8 seiten), Schnellstart-Handbuch (7 seiten)

Seite drucken

HP- 100 / 120

CAUTION

！

●Be sure to unplug the pump unit.

●When performing replacement work, the pump body may still be hot and you could

get burned. So please wait until the pump has cooled before handling.

●Be sure to remove the chamber block and the actuating rod before replacing the

electromagnet.

●It is better to let an experienced technician handle the soldering process. Take

precautions against getting burned.

STEP

REMOVAL OF ELECTROMAGNET

Cut the wire from the terminals on electromag-

nets with nippers.

●It is recommended that you make a note of the wiring.

STEP

Loosen the screw, fixing SP switch and remove it .

(There are hexagonal nuts at SP switch side. Be

sure not to lose them as they fall inside the unit.)

STEP

Remove the nuts by the box driver.

(8mm wrench)

Pull out the electromagnet from the pump body.

REPLACING THE ELECTROMAGNET