HIBLOW hp-150 Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Teichpumpen HIBLOW hp-150 herunter. HIBLOW hp-150 8 Seiten. Air pumps
Auch für HIBLOW hp-150: Gebrauchsanweisung (13 seiten), Gebrauchsanweisung (17 seiten)

Seite drucken

HP- 150 / 200

STEP

MOUNTING THE ELECTROMAGNET

Mount new electromagnet in the unit.

Fix frame stay temporarily.

(Do not tighten screw of frame stay and keep

them rather loose.)

Tighten up hexagonal nuts with nut driver.

Fasten screws of frame stay.

STEP

Install the SP switch to the frame with the screws.

●Be careful of the direction of switch lever. (Refer to the

pictures)

STEP

Insert the wire into the silicon tube, and tie up in a

bundle.

Strip the coating off each wire.

(5-7mm from the end)

Connect the wires to the terminals.

Solder the wires to the terminals.

The wire requires a soldered connection.

STEP

This completes the electromagnet replacement

procedure.

REPLACING THE ELECTROMAGNET