Automatic LPM200 Bedienungs- und Installationshandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Bedienungs- und Installationshandbuch für Industrielle Ausrüstung Automatic LPM200 herunter. Automatic LPM200 16 Seiten. Stationary roller mill

Seite drucken

TO BE VALID, THE WARRANTY CARD MUST BE COMPLETED IN ITS ENTIRETY BY

AN AUTHORIZED DISTRIBUTOR OR DEALER AND SENT TO AUTOMATIC EQUIPMENT

MANUFACTURING COMPANY, P.O. BOX 430, PENDER, NEBRASKA 68047. FAILURE TO DO SO

WILL VOID THIS WARRANTY.

The manufacturer warrants all AUTOMATIC roller mills to be free from defects in material and

workmanship under the normal use and service for which the machine was intended.

ONE YEAR WARRANTY - At any time within one (1) year from date of delivery to the original

purchaser, the manufacturer will furnish replacement parts or repair material for any portion of the

roller mill found to be defective. Such replacement part or repair material shall be furnished without

cost to the owner or the user through an authorized dealer, or F.O.B. factory at manufacturer's

option. Automatic liability under this warranty must be for part or parts but not for such labor charges

involved for removing and replacing defective parts. The warranty repair period for equipment used

for commercial or rental purposes is limited to thirty days. All rolls are guaranteed for life against

breakage.

This warranty does not apply to any part of an Automatic roller mill which has been subject to misuse,

neglect, alteration, accident, or damage caused by fire, flood, or other damage beyond control of the

manufacturer. IN NO EVENT SHALL THE OWNER BE ENTITLED TO RECOVER FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, LOSS OF CROPS, LOSS

OF PROFITS OR REVENUE, OTHER COMMERCIAL LOSSES, INCONVENIENCE OR COST

OF RENTAL OR REPLACEMENT EQUIPMENT. No responsibility is assumed for delays or failure

caused by strikes, Government regulations, or other circumstances beyond the control of the

manufacturer or authorized dealer or distributor. Further, tires and tubes are warranted directly by the

respective manufacturer only and not by Automatic Equipment Manufacturing Company.

Automatic Equipment Manufacturing Company assumes no liability for damages that might be

inflicted on the operator, spectator or general public who might be in the general area while the

machine is in operation, or for any cause whatsoever.

Removal of original serial number voids this warranty in its entirety..

It is a continuing policy of Automatic Equipment Manufacturing Company to make improvements. The

company reserves the right to make these improvements without incurring any obligation to add them

to machines already in the field. Many years of research combined with experience gained through

close contact with operators have been drawn upon in designing your mill.

Please visit us at

405-0525 Rev A

Warranty

www.automaticag.com

agricultural equipment.

Page 16 of 16

for our complete line of

4/5/16