EMERGENT EYE Installations- und Gebrauchsanweisungen

Blättern Sie online oder laden Sie pdf Installations- und Gebrauchsanweisungen für Inneneinrichtung EMERGENT EYE herunter. EMERGENT EYE 2 Seiten. Cable managed desks

Seite drucken

Electric Installation.

Installation and user instructions for

Eye and Media cable managed desks

DIAGRAM A

Electrical items required

BS6396: 2008 Electrical Systems in Office

Furniture & Educational Furniture

Electrical equipment and installations must be designed and

tested to ensure their safety and to comply with statutory

regulations, in particular the "Electricity at Work Regulations".

Relevant British Standards may be used as a means of

demonstrating safety and compliance with the regulations.

In the case of electrical systems in office furniture and educational

furniture, the relevant standard for systems connected to the

mains supply by means of a 13A plug is BS 6396:2008.

6 Outlets

4 Outlets

DIAGRAM B

20mm Ceramic Fuses

2 Outlets

13A Plug Fuse

A. Media/Eye Trunking

B. No. 8 x ½" Woodscrew

C. Trunking End Cap

D. M4 Taptite Screw

E. Serrated Washer

F. Media Leg Riser

G. Leg Riser Cover

Sockets installed in office furniture are

intended to supply office equipment with

a rating not exceeding 5A with BS 6396

referring to all office furniture electrical

installations when completed must be tested.

Section 7 of BS 6396 sets out the procedures.

These tests should also be carried out on

reconfigured desks and screens as well

as new installations. Periodic inspections

and tests must be carried out to fulfil the

requirements of BS 6396 and the "Electricity

at Work Regulations" in maintaining a safe

working environment.

Sockets installed in office furniture are

intended to supply office equipment with

a rating not exceeding 5A.

The diagrams on the left indicate the

maximum number of socket outlets that may

be connected from a single power supply

cable fed from a 13 Amp BS 1363 plug and

their relevant fuse ratings.