Celect CC852KIT Gebrauchsanweisung - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Thermostat Celect CC852KIT herunter. Celect CC852KIT 10 Seiten. Rf programmable thermostat

Seite drucken
D. Start/Reset:
1.
Place 2 pcs AAA 1.5V alkaline batteries according
to the polarities marked.
2.
LCD display will be switched on.
If there are any display or functional errors,
please remove the batteries for about 30 sec
to reset the thermostat.
3.
Temperature detection starts and LCD displays the
room temperature.
4.
will be flashing if Battery is LOW. Replace the
battery immediately.
5.
Defrost function is activated with
when temperature is 5°C or below.
Output will be ON @ Heat mode & OFF @ Cool
mode.
6.
LCD will display Lo if temperature is below 0°C,
7.
LCD will display HI if temperature is above 40°C,
8.
Insert the receiver plug to power socket.
displayed
9
E. Operation Mode:
Press
key to switch between the 3 operation
modes below.
1. Program Mode
The thermostat controls the room temperature
according to the programs.
2. Temporary Override Mode
The thermostat controls the room temperature
according to the override temperature temporarily, and
returns to Program mode for the next Comfort / Econ
mode transition.
3. Permanent Override Mode
The thermostat controls the room temperature
according to the override temperature permanently.
or
will be displayed
or
will be displayed
will be displayed
10