Celect DRF3 Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Thermostat Celect DRF3 herunter. Celect DRF3 6 Seiten. Rf thermostat

Seite drucken

3.Switch

the

heater/cooler

heater/cooler will remain OFF until transmitter activates

the output ON with

C. Normal Time Mode:

1. Temperature detection starts and LCD displays the room

temperature.

2. If Battery is LOW,

be replaced with new one immediately.

3. Defrost function is activated with

temperature is 5° C or below. Output will be forced to ON

@ Heat & OFF @ Cool.

4. Below 0° C, transmitter will display LO.

5. Above 40° C, transmitter will display HI.

D. Temperature Setting Up:

1. Select the comfortable temperature by pressing <

> to desirable temperature.

and

receiver.

displayed on LCD.

will be On. The old batteries must

displayed when

The

low, or where it has great temperature changes (e.g. near

door). Do not place the thermostat near heat/cool

generating sources.

2. Wiring:

Caution: Turn off the electrical devices and receiver

before wiring.

There is 4-wire cable provided

Color

Brown

Blue

Black

Grey

-It is recommended that a 10A fuse is fitted at grey wire.

(Please refer to the wiring diagram on the last page.)

> or

3. Mounting:

Using the accessory screws and wall anchors provided,

mount DRF3 with the key-hole at the back. The

transmitter and receiver should be mounted on the wall

Connection

240Vac Live

240Vac Neutral

240Vac Live

Device's power input