Automatic WTLD018 Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Bohrer Automatic WTLD018 herunter. Automatic WTLD018 16 Seiten. 20v drill/driver

Seite drucken

into the charger, as other objects may touch dangerous

voltage points or short out parts, which could result in fire

or electric shock.

• Do not place the tool or charger on an uneven surface,

as a fall may cause serious damage.

• Never place the tool or charger near or over a heat

source such as a radiator or heater.

• Do not operate the charger in a cabinet or other

enclosure unless proper ventilation is provided.

• Use the battery charger indoors only.

WARNING. Do not allow any liquid to come into contact

with the charger. There is a danger of electric shock. Do not

position the tool or battery charger near water; for example,

near a sink, wash bowl or toilet. Do not spill liquid of any

kind on the tool or charger. Doing so may short out parts,

causing damage to the product and creating the risk of fire

or electric shock.

Take the tool or charger to your nearest authorised service

centre for assistance in these circumstances:

• If liquid has been spilled into the tool or charger, or if rain

or water has touched the tool, Battery Pack or charger.

• If the tool or charger does not operate normally after you

follow the operating instructions.

• If the tool or charger has been dropped or damaged.

• If the tool or charger exhibits a distinct degradation in

performance.

• If the tool or charger is damaged in any way.

• If the battery pack is not charged within the time frame as

specified in this manual, turn charger off.

• To reduce the risk of an electric shock, unplug the

charger from the power supply before attempting to clean

it. To clean tool or charger, wipe with a damp cloth. Use

of any other cleaners is not recommended.

• Do not place any object on to, or allow anything to rest

on the charger.

• Make sure that the charger cable is positioned where

it will not be stepped on, tripped over or otherwise

subjected to damage or stress. Keep the lead away

from operating machinery.

• Do not pull on the lead of the charger to disconnect it

from the mains power socket.

• Do not use an extension cord unless it is absolutely

necessary. The use of an improper extension cord could

cause the risk of fire, electric shock or electrocution.

• Never attempt to connect two chargers together.

• Do not charge batteries or use the tool and battery

pack in locations where the temperature may be below

0°C or exceed 40°C such as alongside sheds or metal

structures.

• The battery can be charged or operated at temperatures

between 0° C and 40° C.

NEVER CHARGE YOU LITHIUM ION BATTERY BELOW

OR ABOVE TEMPERATURES RECOMMENDED

OTHERWISE FIRE OR SERIOUS DAMAGE TO THE

BATTERY PACK MAY OCCUR.

The most suitable temperatures to charge the battery pack

are between 20 - 25° C.

• If you wish to charge a second battery pack, unplug the

charger from the mains supply and leave it for at least

15 minutes. After this time you can charge a second

battery pack.

Additional safety instructions related

to the battery pack and battery safety

• Use only the AUTOMATIC batteries supplied with the

AUTOMATIC Tool or AUTOMATIC-approved replacements.

• Do not use the battery to power any device other than

the AUTOMATIC tool it was sold with.

• Charge the battery only with the AUTOMATIC charger

supplied with the tool or AUTOMATIC-approved

replacements and according to the instructions in the

AUTOMATIC Instruction Manual.

• Do not charge the battery in a place where static