HiBoost Home 10K Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Extender HiBoost Home 10K herunter. HiBoost Home 10K 20 Seiten. Mobile signal booster

. Short press on the "SET" key

. Short press on the "DEC-" key

. Short press on "INC+" key

. Simultaneously press on the "DEC-" and "INC+" keys for more than 3 seconds

Since the booster has a self-adaptive smart automatic level control (ALC) and

isolation gain processing (ISO), most of the time manual adjustments are not

required to achieve good coverage. However, in some cases where the ALC or

ISO is working at a very high rate to adjust the gain and the Alarm or ISO LED is

flashing more than once a second, a manual adjustment might be desired.

When the LCD is in the fixed display mode, press the "SET" key for more than 3

seconds. It will go into the "Gain Setting Mode" and make one of the gain

values start to blink.

. Briefly press "SET" key, and the LCD will switch to the next gain value and it will

start to blink. (Uplink or downlink gain for a different band).

- Press "INC+" key once shortly and the gain will increase by 1dB, Press "DEC-"

once shortly and the gain value will be reduced by 1dB.

. Press the "SET" key for more than 3 seconds, and the LCD will return to the

fixed display mode.

Actual Gain display

MGC Setting Gain

Actual Power display

Note: When adjusting the gain manually, please ensure that the uplink gain is

equal to or not 5 dB less than the downlink gain setting. This avoids interference

with the local cell site tower network.

When the LCD is in the fixed display mode, press the "DEC-" and "INC+" key

simultaneously for more than 5 seconds, the booster will reset the gain to the

default manufacturer settings.

When the LCD is in the alarm display mode, press the "SET" key and the LCD

screen will turn on to help with troubleshooting and display the alarm indication

showing the affected band or bands, press the "INC+" (or "DEC-") key will

switch to different pages.

If none of the keys are pushed within 30 seconds, the display will return to the

fixed display mode.lf none of the control keys are pushed within 5 minutes, the

LCD screen will turn off. Pressing any key will return the display to the fixed

mode.

12/18