AFG Molly W860 Montageanleitung Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Baby & Kleinkindmöbel AFG Molly W860 herunter. AFG Molly W860 9 Seiten. 6 drawer dresser

Seite drucken

*Dresser Wall Safety Strap

• TOOLS NECESSARY: RUBBER MALLET, PHILLIPS SCREW DRIVER.

• TOOLS AND HARDWARE SHOWN ARE NOT INCLUDED.

WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITURE MAY TIP OVER. FOR

YOUR CHILD'S SAFETY, PLEASE INSTALL THE SAFETY WALL STRAP BEHIND THE

FURNITURE.

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP

THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL US

AT:

[email protected]

Safety Wall Strap 8" x 1.5" (1 pc)

Screw D4 x 3/4" (1 pc)

STEP 1: Make a mark near the top of the back side of

the furniture (in the center toward the top frame of the

furniture of where you would like to install the safety

wall strap). Insert the short screw through the washer

and through the safety wall strap. Install the screw into

where the mark was made behind the furniture using a

Phillips screw driver

STEP 2: Locate a wall stud. With the back of the

furniture against the wall, locate the middle of the top

of the dresser and make a mark against the wall.

Measure 5cm down from the mark and drill a 1/8" pilot

hole through the wall stud and into the plaster wall.

CAUTION: The changer unit must be centered on a

wall stud as shown. If you are unsure of how to locate

the wall stud, contact a professional contractor.

STEP 3: Attach the wall strap to the wall stud using the

long 1-1/2" screw and washer as shown. Make sure

strap holds steady and complete installation.

CAUTION: Do not attempt to screw into the plaster

wall only. You must also screw into a wall stud.

OR VISIT WWW.AFGBABYFURNITURE.COM

Washer (2 pcs)

Plastic Drywall Anchor (1 pc)

Screw D4 x 1-3/8" (1 pc)

Wall Stud