DaytonAudio DA350D Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken DaytonAudio DA350D herunter. DaytonAudio DA350D 16 Seiten. 70v rackmount pa mixer-amplifier

Seite drucken

Input Wiring

Using high quality balanced 22-24 gauge cable, connect to the balanced inputs by using the included

Phoenix style connectors. Shielded cable will provide the best results. Unbalanced or unshielded cable

may result in RF noise or a Hum in the input signal.

You can also connect devices such as CD players, computers, or streaming devices using the available

Stereo RCA connecti ons. The stereo signal will be summed to mono for both the amplifi er and line level

outputs

Note: Do not use the RCA input on a single channel at the same ti me as the Phoenix style input.

Output Wiring

Connect passive speakers to the output terminals on the rear of the amplifi er. To avoid damage to the

amplifi er or speakers, be sure the 70V/4-16Ω is in the correct positi on for your system.

It is recommended that high quality, heavy gauge, two conductor twisted speaker cable is used when

connecti ng your loudspeakers. 14-16 AWG wire will work in most applicati ons

Connecti ng to AC Mains

Connect your amplifi er to mains power using the supplied AC power cable to a grounded outlet. The

third prong of the AC power cable is important and necessary for safe operati on of your amplifi er. Do not

att empt to disable the ground connecti on.