DaytonAudio DA650D Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken DaytonAudio DA650D herunter. DaytonAudio DA650D 16 Seiten. 70v rackmount pa mixer-amplifier

Seite drucken

Bluetooth Pairing

To pair a Bluetooth device to the built in media player, press and hold the mode button to activate pairing

mode and search for "BP10_BT" on your Bluetooth device.

Input Level Control

Each input channel has the ability to accept line and microphone signals and can

also supply phantom power to microphones when necessary.

Set the level control switch on each channel according to the source that is

connected. Improperly setting this switch could result in the signal being too quiet

or being distorted.

VOX Function

Audio activated ducking is a useful feature that can mute other channels when audio

is present on Channel 1. Adjusting the "Mute" knob on the rear of the amplifier will

control how much audio is required to mute the other inputs. Turning "mute" all the

way down (counterclockwise) will disable this function.

Priority and EMC Muting

Channel 1 can also be used as a priority channel. All other channels

can be immediately muted when pins 3 and 4 on the priority muting

interface connector are shorted using an external switch or the button of a

dedicated paging microphone

The Amplifier also has the ability to accept Emergency Control Muting

(EMC) from capable safety systems, muting all output from the amplifier.

This feature can be activated by shorting pins 1 and 3 on the priority

muting interface connector.

Output Level Control

Set the main volume output with the Master Volume knob. Avoid overpowering the connected speakers

as too much power can distort and damage loudspeakers over time. The built in limiter and protection

circuit acts as a safeguard against clipping and short circuits.

Aux Output

The Aux audio output is a mono mix of all signals. The master volume output and tone controls will have

no affect on the aux output signal.