GreatCo GBI-34 Installations- und Betriebsanleitung für den Hausbesitzer - Seite 8

Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für den Hausbesitzer für Innenkamin GreatCo GBI-34 herunter. GreatCo GBI-34 10 Seiten. Gallery electric fireplaces
Auch für GreatCo GBI-34: Installations- und Betriebsanleitung für den Hausbesitzer (11 seiten), Installations- und Betriebsanleitung für den Hausbesitzer (11 seiten)

Remote control functions
Note:
The fireplace Main Power Switch must be switched ON in order for the Remote Control to function.
In order to protect the product from overheating, there is 8s delay when turning on the heater; also there
is 8s delay when turning off the heater fan.
Make sure the batteries are installed properly in the remote control.
The effective range of the remote control is up to 13 feet (4 meters).
ICON
In the unlikely event of a problem occurring due to a manufacturing fault within 24 months from the
date of purchase
of the appliance it will be repaired or replaced free of charge.
This warranty does not cover consumable items such as the bulbs and fuses which have a limited
lifespan.
If a problem should occur, the nature of the problem together with the date of a purchase should be
immediately reported to the retailer that the appliance was purchased from. Proof of purchase will
be required so the original receipt should be retained.
Warranty applies to the original owner only and is non-transferrable.
TITLE
POWER
Press once turns appliance on. Press again turns appliance off.
The fire has four flame effects, by pressing the flame effect button
FLAME
the unit will cycle through each effect.
Press once turns 750W power on. (Pilot lights illuminated ●○)
HEATER
Press again turns 1500W power on (Pilot lights illuminated ●●)
Press third time turns heater off. (Pilot lights illuminated ○○)
Digital display shows the TEMP setting 23°C (73°F) (default), with
14 settings cycling from "OFF", "16°C" to "28°C" (61°F to 82°F).
The TEMP will increase by 1°C/F up to 28°C(82°F) when pressed
TEMP
each time.
By pressing the TEMP for 3S, the digital display can switch
between °C and °F.
TIMER
Cycles from OFF, 0.5H, 1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, to 9H.
AMBIENT
By pressing the ambient lighting button the unit will turn ambient
LIGHTING
lighting on or off.

WARRANTY

FUNCTION
8