HiBoost F23 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken HiBoost F23 herunter. HiBoost F23 19 Seiten.

Step5: Connect the AC power cord to the signal booster, and then connect the

plug to the electrical outlet to power on the booster

Booster installation

4. Booster Commissioning

Overview: The booster has quite intelligent startup system, booster commissioning

is an automatic process to guarantee its optimal performance.

After finishing the booster system installation, please power on the booster, the

booster starts its initialization to check it is receiving signal, the isolation status to

ensure its best performance. This will take around 3~5 seconds.

After the booster start up, please check whether the coverage is good. If it is good,

the booster system is completed.

You can check the output power displayed in LCD. It may vary at 1~3dB difference

which is normal due to outdoor signal conditions. It would be perfect that the

output power reaches its rated one for largest coverage; but you can always

leave it even though it doesn't as long as the coverage is good enough for you.

In case the coverage is not enough, please take below measures as per below

conditions.

1. The rated output power is reached, but the coverage is not enough or the

signal in specific areas has not been improved

Check whether the indoor antenna is installed correctly or not, you may try to



move the antenna location to improve coverage.

Check if it is necessary to adjust the direction of the indoor antenna.



Connection from cable to booster