Greater Goods 0376 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Skalen Greater Goods 0376 herunter. Greater Goods 0376 14 Seiten. Body fat analyzer

Initial Start-Up

Initialising Your Scale

1. Press the platform centre and remove your foot.

2. "0.0" will be displayed.

3. The scale will switch off and is now ready for use.

This initialisation process must be repeated if the scale is moved.

At all other times step straight on the scale.

Your Greater Goods,LLC Body Fat Analyzer will operate as a conventional

weight - reading scale. No special programming steps are required.

Once the scale is initialized, as previously described, you may simply step on

the scale to measure your current weight. For only weight reading.

1. Position the scale on a flat, hard

surface. Carpeted or uneven

floors may affect accuracy.

2. Step onto the scale platform

and remain still while the

scale computes your weight.

3. The scale will display your

weight value.

4. The scale will automatically

turn off after a few seconds.

Note: The weight value won't be saved in the scale, and won't be transmitted to the APP.

Please process the user setting before your first measurement.

(Refer to Set Up Your Profile for more details)

STEP 1: Step on the platform barefooted.

STEP2: Stand still and the weight data will be locked with the unit stop blinking. Keep

full contact with the conductors until the LCD stop displaying moving "

STEP 3: The measuring results will be displayed sequentially four times:BMI, Body

Fat, Muscle Mass,Total Body Water, Bone Mass, Weight, and then turn off.



* If it fails to complete the analysis, the LCD will only display the weight data.

(To find out the solutions, please refer to Troubleshooting for more details.)

When your scale is successfully paired with your smartphone and the Bluetooth is ON,

0375,0376 will process data transmission instead.

(Please refer to Data Transmission for more details.)