DaytonAudio AERO Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner DaytonAudio AERO herunter. DaytonAudio AERO 12 Seiten.

7. Troubleshooting

To keep the warranty valid, never try to repair the system yourself.

• Make sure that the AC power plug of the speaker is connected properly.

• Make sure that there is power at the AC outlet.

• Check whether the speaker is muted, the mute indicator is red when the speaker is muted. If the

speaker is muted, please tap mute once to return to play mode.

• Check the source indicator display

Dark Blue: Wi-Fi

Light Blue: Bluetooth

Green: AUX In (Please check the connections)

• Please check if the iOS or Android device is connected properly

• Check whether the router is working properly and connected to the Internet.

• If there is no sound from a speaker in a group, the speaker could be out of range. Check the

signal strength in the speaker settings menu or by moving the speaker closer to your router or

master Hi-Fly device.

• Reset the AERO Wi-Fi setting, setup the Wi-Fi network again.

• Turn OFF and ON the power switch on the side of the speaker.

• If there is no sound from a speaker in a group, check whether the speaker is out of range. You

can check the wireless signal strength of the speaker in the speaker settings menu.

• To reset the speaker Wi-Fi settings, hold down the source button (3-5 seconds) in Wi-Fi source

mode (dark blue).

Do one or all of the following:

• Move the AERO closer to your Wi-Fi router or master speaker.

• Remove any obstacles between the AERO, your Wi-Fi router or master speaker.

• Check if your network speed is fast enough, (in the case where multiple devices share the same

router, the wireless performance may be affected), turn off other devices connected to your

home router.

(11)