GAI-Tronics 1099 Installations- und Benutzerhandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Telefon GAI-Tronics 1099 herunter. GAI-Tronics 1099 20 Seiten. Hands-free telephones vandal resistant (vr) and help point
Seite drucken
2)
Has the default PIN code already been changed by another user?
Check your own records and enter the correct PIN code as necessary.
Note that this problem can only occur if you are carrying out a re-
programming exercise. Telephones always leave the factory with the
value **0000 set as default.
3)
After entering the PIN code you can check that it has been received and
understood by the SMART Telephone –Wait three seconds and enter
the command *20. If all is ok then you will here a string of 6 DTMF tones
in the handset earpiece of your tone dialling phone. You can now
assume that it's ok to continue with your required programming (Starting
at 8)
7.2. Further programming options
In addition to programming auto-dial numbers, several other features
can be programmed using a tone-phone.
7.2.1
The call time out is factory set to 7 minutes, meaning that the phone will
drop the call and go back on hook electronically after this period even if
a call is in progress. This feature is provided to guard against the
handset being left off hook and tying up the line.
The timer can be set in increments of 10s from 60s to 9980s by entering
the code *50, followed by the required timeout divided by 10s, followed
by #.
For example to set the timer to 3 minutes enter *50 18 # (3min is 180s,
18 is 180/10).
This command must be entered between entering the PIN and closing
the phone down with *99.
To disable the timer use a value of 999, ie *50 999 #.
The phone will respond to a successful command with a single tone.
7.2.2
To enter a pause (approx 1 second gap) into a dial number, use the
digits *1.
For example to program 9 <pause> 12345 into memory 1, use
*101 9 *1 12345 #
7.3. TMA
GAI-Tronics TMA is a fully featured software application (Telephone
Management Application) for Windows™ XP, offering the facilities to program,
maintain, monitor and report on all types of GAI-Tronics SMART products.
VR & Help Point
Time-out
Inserting a pause into an auto-dial number
13