DaytonAudio SPA250DSP Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Subwoofer DaytonAudio SPA250DSP herunter. DaytonAudio SPA250DSP 18 Seiten. 250w subwoofer plate amplifier with dsp
Seite druckenBack panel and input/output (I/O) definition
1. Power Mode: Select the either energy-saving or "always-on" power mode
o Auto: Amp goes into standby after no detected signal input for 20 minutes*
o On: Amp is always on, regardless of input signal status.
* Amp will automatically turn on typically in one second or less once audio signals are resumed.
2. Analog input attenuation: Affects analog balanced and unbalanced inputs only.
o Normal: No attenuation.
o Hi: Attenuates input signal by -6dB.
3. USB Control: Used for PC-GUI communication with custom PC software included with your amp.
Please refer to PC-GUI user guide on
release. See
Page 16
4. Feature Control: Single knob digital actuator with single/double-click enabled with rotary scrolling to
navigate the amp's extensive feature menu.
5. Limiter LED: Lit when Limiter is active (Red).
6. Standby/On LED:
o Red when amp is in energy saving "stand by" state.
o Green when amp is operating normally.
Page
for more on the system "flash" update process.
8.
USB also allows for firmware update by Dayton Audio